Input interpretation
![fluoroform](../image_source/9808d032b2d8c1ba3a9cb9ef861d0a9f.png)
fluoroform
Chemical names and formulas
![formula | CHF_3 name | fluoroform alternate names | carbon trifluoride | fluoryl | Freon 23 | halocarbon 23 | HFC-23 | methane, trifluoro | methane, trifluoro- | methyl trifluoride | R-23 | trifluoromethane mass fractions | C (carbon) 17.2% | F (fluorine) 81.4% | H (hydrogen) 1.44%](../image_source/6df6e8388b7a108d1ba8e7a0e1d43d18.png)
formula | CHF_3 name | fluoroform alternate names | carbon trifluoride | fluoryl | Freon 23 | halocarbon 23 | HFC-23 | methane, trifluoro | methane, trifluoro- | methyl trifluoride | R-23 | trifluoromethane mass fractions | C (carbon) 17.2% | F (fluorine) 81.4% | H (hydrogen) 1.44%
Lewis structure
![Draw the Lewis structure of fluoroform. Start by drawing the overall structure of the molecule: Count the total valence electrons of the carbon (n_C, val = 4), fluorine (n_F, val = 7), and hydrogen (n_H, val = 1) atoms: n_C, val + 3 n_F, val + n_H, val = 26 Calculate the number of electrons needed to completely fill the valence shells for carbon (n_C, full = 8), fluorine (n_F, full = 8), and hydrogen (n_H, full = 2): n_C, full + 3 n_F, full + n_H, full = 34 Subtracting these two numbers shows that 34 - 26 = 8 bonding electrons are needed. Each bond has two electrons, so the above diagram has all the necessary bonds. There are 4 bonds and hence 8 bonding electrons in the diagram. Lastly, fill in the remaining unbonded electrons on each atom. In total, there remain 26 - 8 = 18 electrons left to draw: Answer: | |](../image_source/8f706c4db4a63f838f3c221f01b16164.png)
Draw the Lewis structure of fluoroform. Start by drawing the overall structure of the molecule: Count the total valence electrons of the carbon (n_C, val = 4), fluorine (n_F, val = 7), and hydrogen (n_H, val = 1) atoms: n_C, val + 3 n_F, val + n_H, val = 26 Calculate the number of electrons needed to completely fill the valence shells for carbon (n_C, full = 8), fluorine (n_F, full = 8), and hydrogen (n_H, full = 2): n_C, full + 3 n_F, full + n_H, full = 34 Subtracting these two numbers shows that 34 - 26 = 8 bonding electrons are needed. Each bond has two electrons, so the above diagram has all the necessary bonds. There are 4 bonds and hence 8 bonding electrons in the diagram. Lastly, fill in the remaining unbonded electrons on each atom. In total, there remain 26 - 8 = 18 electrons left to draw: Answer: | |
3D structure
![3D structure](../image_source/dda49eb9344fdad422857e13684acf5f.png)
3D structure
Basic properties
![molar mass | 70.014 g/mol phase | gas (at STP) melting point | -160 °C boiling point | -84 °C solubility in water | insoluble dielectric constant | 1.007](../image_source/0c1316553a60110e7db0923d71bea468.png)
molar mass | 70.014 g/mol phase | gas (at STP) melting point | -160 °C boiling point | -84 °C solubility in water | insoluble dielectric constant | 1.007
Gas properties (at STP)
![vapor density | 2.43 (relative to air) refractive index | 1.00043 dynamic viscosity | 1.491×10^-5 Pa s (at 25 °C)](../image_source/00d961636bbcea0c9d44f3237e74dcac.png)
vapor density | 2.43 (relative to air) refractive index | 1.00043 dynamic viscosity | 1.491×10^-5 Pa s (at 25 °C)
Units
Thermodynamic properties
![specific heat capacity c_p | gas | 0.7284 J/(g K) molar heat capacity c_p | gas | 51 J/(mol K) specific heat of formation Δ_fH° | gas | -9.932 kJ/g molar heat of formation Δ_fH° | gas | -695.4 kJ/mol molar heat of vaporization | 16.7 kJ/mol | specific heat of vaporization | 0.2385 kJ/g | molar heat of fusion | 4.06 kJ/mol | specific heat of fusion | 0.057988 kJ/g | critical temperature | 300 K | critical pressure | 4.795 MPa | (at STP)](../image_source/03eedd39acedd1356e73116949f062ff.png)
specific heat capacity c_p | gas | 0.7284 J/(g K) molar heat capacity c_p | gas | 51 J/(mol K) specific heat of formation Δ_fH° | gas | -9.932 kJ/g molar heat of formation Δ_fH° | gas | -695.4 kJ/mol molar heat of vaporization | 16.7 kJ/mol | specific heat of vaporization | 0.2385 kJ/g | molar heat of fusion | 4.06 kJ/mol | specific heat of fusion | 0.057988 kJ/g | critical temperature | 300 K | critical pressure | 4.795 MPa | (at STP)
Phase diagram
![Phase diagram](../image_source/778b033200ad892b0aea15d353824c48.png)
Phase diagram
Units
Chemical identifiers
![CAS number | 75-46-7 PubChem CID number | 6373 PubChem SID number | 24857775 SMILES identifier | C(F)(F)F InChI identifier | InChI=1/CHF3/c2-1(3)4/h1H RTECS number | PB6900000 MDL number | MFCD00000446](../image_source/f38aa55fb2aae30646c645793d773dfb.png)
CAS number | 75-46-7 PubChem CID number | 6373 PubChem SID number | 24857775 SMILES identifier | C(F)(F)F InChI identifier | InChI=1/CHF3/c2-1(3)4/h1H RTECS number | PB6900000 MDL number | MFCD00000446
NFPA label
![NFPA label](../image_source/784daa46f93c8011575d533e426ba4fc.png)
NFPA label
![NFPA health rating | 2](../image_source/3a4709fef061faba3fe17767a05cfd95.png)
NFPA health rating | 2
Safety properties
![flash point | -112 °C upper explosive limit | 35.3% (concentration in air)](../image_source/0f28c5df34bf301efba8e3c9d7eceab1.png)
flash point | -112 °C upper explosive limit | 35.3% (concentration in air)
![DOT hazard class | 2.2 DOT numbers | 3136](../image_source/35c40e0f91968c8010cd5651334b3cdf.png)
DOT hazard class | 2.2 DOT numbers | 3136
Toxicity properties
![odor | odorless](../image_source/1ba42542e5ef586b4df6da98f64e255f.png)
odor | odorless
![RTECS classes | mutagen](../image_source/6f89651e96ae4275e15188a419324e98.png)
RTECS classes | mutagen